标签导航

Cantilever pump

The basic principle of centrifugal pump: the principle of centrifugal pump is to continuously inhale the medium by the difference between the internal and external teeth of the pump, and rely on the high-speed rotation of the impeller to make the liquid obtain potential energy, and then discharge it through the diffuser discharge pipe.

产品内容

OH1 ZTS

ZTS petrochemical process pump isdesigned according to API610 7thedition and VDMA24297 (light/medium)standard.

隐藏域元素占位

OH1 ZTB

ZTB series standardized I pumps are horizontal, single-stage, single-suction centrifugal pumps, the size and performance conform to DIN24256/ISO2858 standards.

隐藏域元素占位

Opening permit

隐藏域元素占位

OH3 ZTDS

The ZTDS pump needs to use a vertical drive, and the thrust load of the pump and the weight of the rotor will be supported by the thrust bearing of the pump.

隐藏域元素占位

OH1 PLA

The pump is a single-stage, horizontal, radial partial flow pump (also called a tangential pump), which is a special centrifugal pump. Adopt bracket structure, single suction fully open impeller, axial suction and tangential discharge. Packing seal, single-end mechanical seal or double-end mechanical seal are used according to the conditions of use, and are equipped with cooling, flushing or sealing liquid systems, and the rated pressure levels of the suction and discharge flanges are the same. Viewed from the motor end, the pump turns counterclockwise.

隐藏域元素占位

新闻内容

undefined

undefined

标签导航

Cantilever pump

The basic principle of centrifugal pump: the principle of centrifugal pump is to continuously inhale the medium by the difference between the internal and external teeth of the pump, and rely on the high-speed rotation of the impeller to make the liquid obtain potential energy, and then discharge it through the diffuser discharge pipe.

产品内容

OH1 ZTS

ZTS petrochemical process pump isdesigned according to API610 7thedition and VDMA24297 (light/medium)standard.

隐藏域元素占位

OH1 ZTB

ZTB series standardized I pumps are horizontal, single-stage, single-suction centrifugal pumps, the size and performance conform to DIN24256/ISO2858 standards.

隐藏域元素占位

Opening permit

隐藏域元素占位

OH3 ZTDS

The ZTDS pump needs to use a vertical drive, and the thrust load of the pump and the weight of the rotor will be supported by the thrust bearing of the pump.

隐藏域元素占位

OH1 PLA

The pump is a single-stage, horizontal, radial partial flow pump (also called a tangential pump), which is a special centrifugal pump. Adopt bracket structure, single suction fully open impeller, axial suction and tangential discharge. Packing seal, single-end mechanical seal or double-end mechanical seal are used according to the conditions of use, and are equipped with cooling, flushing or sealing liquid systems, and the rated pressure levels of the suction and discharge flanges are the same. Viewed from the motor end, the pump turns counterclockwise.

隐藏域元素占位

新闻内容

undefined

undefined