ZTS petrochemical process pump isdesigned according to API610 7thedition and VDMA24297 (light/medium)standard.

ZTB series standardized I pumps are horizontal, single-stage, single-suction centrifugal pumps, the size and performance conform to DIN24256/ISO2858 standards.

The ZTDS pump needs to use a vertical drive, and the thrust load of the pump and the weight of the rotor will be supported by the thrust bearing of the pump.

The pump is a single-stage, horizontal, radial partial flow pump (also called a tangential pump), which is a special centrifugal pump. Adopt bracket structure, single suction fully open impeller, axial suction and tangential discharge. Packing seal, single-end mechanical seal or double-end mechanical seal are used according to the conditions of use, and are equipped with cooling, flushing or sealing liquid systems, and the rated pressure levels of the suction and discharge flanges are the same. Viewed from the motor end, the pump turns counterclockwise.

This pump is suitable for conveying clean or particle-containing liquids, low-temperature or high-temperature liquids, neutral or corrosive liquids.

ZTM series is horizontal, multi-stage, single shell, segmental structure, high efficiency, low NPSH value, API610 BB4 pump type.

SM series pumps are single-stage, double-suction centrifugal pumps. The installation form of the pump is horizontal.

A pump is a machine that conveys or pressurizes a fluid. It transfers the mechanical energy of the prime mover or other external energy to the liquid, making the liquid energy increase. The pump is mainly used to transport liquids such as water, oil, acid-base liquid, emulsion, suspension emulsion and liquid metal, and can also transport liquid, gas mixture and liquid containing suspended solids. Pumps can usually be divided into three categories: positive displacement pumps, dynamic pumps and other types of pumps according to their working principles. In addition to classification by working principle, it can also be classified and named by other methods. For example, according to the driving method, it can be divided into electric pump and turbine pump; according to the structure, it can be divided into single-stage pump and multi-stage pump; according to the purpose, it can be divided into boiler feed pump and metering pump; Water pump, oil pump and mud pump, etc. According to the structure with or without shaft, it can be divided into linear pump and traditional pump. The water pump can only transport the flow with the fluid as the medium, and cannot transport the solid.
< 12 >