IH

Horizontal single-stage single-suction volute centrifugal pump, with axial suction and radial discharge. Its size and performance conform to ISO2858 standard

Key words:

Category:

Product consultation:

Product consultation:

Structural features:

●Horizontal single-stage single-suction volute centrifugal pump, with axial suction and radial discharge. Its size and performance conform to ISO2858 standard

The structure of the rear door makes the pump do not need to disassemble the inlet and outlet pipelines during maintenance.

●Auxiliary vanes are used to balance the axial force. The closed impeller fully increases the efficiency of the pump. Optional semi-open impeller (IHO)

●In the case of containing solid particles, various forms of sealing structures can be used to adapt to different working conditions; requirements. Optional packing seal, single mechanical seal, double mechanical seal

●29 specifications only have 4 bearing frames, good interchangeability

●The characteristic curve is flat, with high cavitation performance and high efficiency. These characteristics are maintained even at full load

●According to the difference of material and temperature, the flange is designed with PN16 pressure class

Performance parameters:

Flow (Q) ~ 400m3/h

Head (H) ~ 125m

Design pressure: 1.6MPa

Operating temperature: -45C to +180C

Related Products

OH1 ZTS


ZTS petrochemical process pump isdesigned according to API610 7thedition and VDMA24297 (light/medium)standard.

OH1 ZTB


ZTB series standardized I pumps are horizontal, single-stage, single-suction centrifugal pumps, the size and performance conform to DIN24256/ISO2858 standards.

OH3 ZTDS


The ZTDS pump needs to use a vertical drive, and the thrust load of the pump and the weight of the rotor will be supported by the thrust bearing of the pump.

OH1 PLA


The pump is a single-stage, horizontal, radial partial flow pump (also called a tangential pump), which is a special centrifugal pump. Adopt bracket structure, single suction fully open impeller, axial suction and tangential discharge. Packing seal, single-end mechanical seal or double-end mechanical seal are used according to the conditions of use, and are equipped with cooling, flushing or sealing liquid systems, and the rated pressure levels of the suction and discharge flanges are the same. Viewed from the motor end, the pump turns counterclockwise.

OH2 ZTH


This pump is suitable for conveying clean or particle-containing liquids, low-temperature or high-temperature liquids, neutral or corrosive liquids.

Advisory Message

Our staff will contact you within 24 hours (working days). If you need other services, please call the service hotline:+86-411-86800129